科 研 项 目 | [1] 河北省自然科学基金项目，E2022402092，孪晶诱发塑性钢的循环疲劳特性及微观损伤机理研究，2022/01-2024/12，10万，在研，主研，第二参与人。 [2] 河北省高等学校科学技术研究项目, BJK2024022, 超细晶MoCoB-Co金属陶瓷的制备与晶粒长大抑制机理研究，2022/01-2024/12，10万，主研，第三参与人。 [3] 河北省高等学校科学技术研究项目，CXY2024040, 铁镍基合金关键冶炼、成形技术及极端服役环境下损伤机理研究，在研，20万，主研，第二参与人。 [4] 河北省自然科学基金项目，E2020402101，过冷奥氏体大变形协同亚MS 等温淬火作用下纳米贝氏体形成机制及其强韧化机理，2020/01-2023/12，6万，结题，主持。 [5] 河北省高等学校科学技术研究项目，QN2020136，低碳超强纳米贝实体钢相变演化及增强增韧机理研究，2020/01-2022/12，3万，结题，主持。 [6] 河北工程大学校科学基金项目，低碳无碳化物贝氏体钢的制备及其强韧化机理研究，2018.06-2020.06，5万，结题，主持。 [7] 邯郸市科学技术研究与发展计划项目, 管线用纳米贝氏体钢组织调控、可焊接性及增强增韧机理研究, 2020/01-2022/12, 0.1万，结题，主持。 [8] 河北省外专百人计划项目，个性化金属支架设计及增材制造, 2020/07-2020/07，50万，结题，参加。 [9] 大功率风电机组用轴承钢关键技术开发，国家科学技术部863计划，主研，632万，2012-2015，632万，参加。 [10] 国家自然科学基金项目，低碳纳米结构超级贝氏体钢的组织调控及强韧化机理研究, 2018/01-2020/12，60万元，结题，主研。 [11] 国家自然科学基金项目，5180105, 低碳纳米无碳化物贝氏体钢强韧化的残余奥氏体多尺寸效应研究，2018/01-2020/12，23万，结题，主研。 [12] 河北省自然科学基金项目, 无碳化物贝氏体钢的疲劳断裂行为与机制研究，6万, 2015/01-2017/12，结题，主研。 [13] 河北省高等学校科学技术研究项目，基于TRIP效应的轻质高强度贝氏体钢多阶段变形行为及强化机理研究，2020/01-2022/12，8万，主研。 [14] 河北省高等学校科学技术研究项目, 基于力学方法研究纳米贝氏体钢的腐蚀行为与微结构关系, 2018-2020, 主研。 [15]企业委托横向技术开发课题，HK2022000557，应力变形板材精准高效矫平设备技术开发，2022/10-2023/04, 32.3万，结题，主持。 [16]企业委托横向技术开发课题，HK2022000248，智能棒材送料系统及装置技术开发，2022/09-2023/05, 18万，结题，主持。 [17] 企业委托横向技术开发课题, HK2022000353，建筑用螺丝生产加工冷却系统技术开发，2021/09-2022/01, 21万，结题，主持。 |
论 文（著 作） | [1] Yizhe Liu, Fuqiang Liu, Chaowen Huang, Leijie Zhao, Zejuan Wang, Li Li, Jingjing Cao, Aimin Li, Hongtao Zeng, Yanhui Wang, Pitting corrosion resistance of tempered N08825 alloy in the inner layer of bimetallic composite pipe, Materials Today Communications, 4l, 2024, 110867. [SCI] [2] Yanhui Wang, Xuyang Shang, Keke Hou, Xiang Chen, Hezong Li, Shiqi Sun, Changqing Cao, Leijie Zhao, Hongtao Zeng, Jun Lin, Effects of sintering temperatures on the thermal conductivity and microstructural evolution of yttrium hydride monoliths by spark plasma sintering, Journal of Materials Research and Technology 33 (2024)1681-1691. [SCI] [3] 等温淬火对含铝无碳化物贝氏体钢组织和性能的影响,任鹏帅,秦 凤,周 骞，赵雷杰，崔 护，彭子奥，武常生, [J]. 材料热处理学报，2024，49(9)：103-109. [4] Guoqiang Yang，Guoqiang Yang , Hongtao Zeng，Penghui Ma, Shuzhen Gao, Leijie Zhao, Jianyu Zhang, Wenfei Shen, Yanhui Wang，Effects of carbon content on the microstructure and mechanical properties of MoCoB-Co cermets，Ceramics International xxx(xxxx)xxx. [SCI] [5] Jiabin Wang，Nan Zhang, Yanhui Wang，Hongsheng Zhao, Huanming Chen，Hongtao Zeng, Leijie Zhao, Qian Yang, Bingyin FengDirect Z-scheme construction of C2N/Mg(OH)2 heterojunction and first-principles investigation of photocatalytic water splitting，International Journal of Hydrogen Energy 53 (2024) 247-255. [SCI] [6] 王艳辉，李雪峰，刘柏松，徐东，姚菲，曾洪涛，赵雷杰，武东东，李丽，热处理工艺对微合金化等温马氏体轴承钢组织与力学性能的影响[J]. 材料热处理学报，2023，44(11)：176-183. [7] Notably accelerated nano-bainite transformation via increasing undissolved carbides content on GCr15Si1Mo bearing steel，Wang Yanhui，Sun Huaqiang，Zhao Leijie，Chen Xiang，Chen Qingan，Sun, Haitao，Wang Jianjun，Yang zhinan，2024, Accepted. [SCI] [8] 氟碳型表面活性剂浓度对离子钯活化液活性的影响, 曾洪涛，刘艺哲，王泽娟，王艳辉，赵雷杰，李 丽，陈庆安，陈 兵，已接受，待见刊。 [9] Leijie Zhao; Jiahui Li; Qian Yang; Yanhui Wang; Xiliang Zhang; Hezong Li; Zhinan Yang; Dong Xu; Jiwei Liu; Study on Friction and Wear Properties of New Self-Lubricating Bearing, Materials, Crystals , 2022, 12(6): 834-834. [SCI] [10] Guoqiang Yang , Jianyu Zhang, Yayu Chen, Hongtao Zeng, Leijie Zhao , Yanhui Wang, Effect of Mn addition on the microstructure, interface structure and mechanical properties of MoCoB-Co cermets prepared by in-situ synthesis, Ceramics International，2023, 49，16477-16485. [SCI] [11] Qian Zhou, Lihe Qian, Feng Qin, Jiangying Meng, Xiliang Zhang, Penghui Ma, Hongji Liu, Xinyue Wang, Leijie Zhao，Reverse loading-rate sensitivity of tensile fracture energy of smooth and pre-cracked specimens of carbide-free bainitic steel, Scripta Materialia, Scripta Materialia, 2022, 218: 114844-114844.[SCI] [12] Qian Zhou; Lihe Qian; Jiangying Meng; Feng Qin; Leijie Zhao,Monotonic Tensile and Cyclic Deformation Behaviors of Carbide‐Free Bainitic Steel Subjected to Austempering and Tempering After Air Cooling, Steel Research International, 2022, 93(7): 2200039-2200039.[SCI] [13] 熊鹏，赵雷杰*，张孜，王艳辉，岳赟，郝晓歌. 无碳化物贝氏体钢摩擦磨损性能研究进展[J]. 技术与市场，2022，29：11-13. [14] 郝晓歌，赵雷杰*，王艳辉，张孜，马鹏辉，岳赟，熊鹏. 三种不同碳含量合金钢等温淬火后组织与性能, 2023，48：46-51. [15] Xiliang Zhang; Junhui Yan; Tao Liu; Hongji Liu; Yindong Shi; Qian Zhou; Leijie Zhao; Zheng Lv，Microstructural evolution and mechanical behavior of a novel heterogeneous medium Mn cold-rolled steel，Materials Science and Engineering A 2021, 800: 140344-14034. [16] Zhao Leijie, Qian Lihe*, Zhou Qian, Li Dongdong, Wang Tongliang, Jia Zhigeng, Meng Jiangying and Zhang Fucheng. The combining effects of ausforming and below-Ms or above-Ms austempering on the transformation kinetics, microstructure and mechanical properties of low-carbon bainitic steel[J]. Materials and Design, 2019, 183: 108-123. [SCI ] [17] Zhang Xiliang; Huafeng Hou; Liu Tao; Liu Hongji; Zhou Qian; Zhao Leijie; Xiaoyan Liu; Cui Haoxuan,The combining effects of ausforming and below-Ms or above-Ms austempering on the transformation kinetics, microstructure and mechanical properties of low-carbon bainitic steel, Materials and Design, 2019, 183: 108-123. [SCI ] [18] Zhang Xiliang; Huafeng Hou; Liu Tao; Liu Hongji; Zhou Qian; Zhao Leijie; Xiaoyan Liu; Cui Haoxuan, Microstructure and Mechanical Properties of a Novel Heterogeneous Cold-rolled Medium Mn Steel with High Product of Strength and Ductility, Chinese Journal of Materials Research, 2019, 33(12): 927-934. [SCI ] [19] Zhao Leijie, Qian Lihe*, Meng Jiangying, Zhou Qian, Zhang Fucheng. Below-Ms austempering to obtain refined bainitic structure and enhanced mechanical properties in low-C high-Si/Al steels [J]. Scripta Materialia, 2016, 112: 96-100. [SCI] [20] Zhao Leijie, Qian Lihe*, Liu Shuai, Zhou Qian, Meng Jiangying, Zheng Chunlei and Zhang Fucheng. Producing superfine low-carbon bainitic structure through a new combined thermo-mechanical process [J]. Journal of Alloy and Compounds, 2016, 685: 300-303. [SCI] [21] Meng Jiangying, Zhao Leijie, Huang Fan, Zhang Fucheng, Qian Lihe*. Isothermal Transformation, Microstructure and Mechanical Properties of Ausformed Low-Carbon Carbide-Free Bainitic Steel[J]. Materials Science Forum, 2018, 941: 329-333. [EI] [22] Penghui Ma*, Jie Shen, Shuai Liu, Qian Zhou, Leijie Zhao, Lihe Qian. Effects of Strain Rate on Low-Cycle Fatigue Behaviors of Fe–22Mn–0.6C TWIP Steel[J]. Advanced Engineering Materials, 2019, 1801042: 1-6. [SCI] [23] 张喜亮; 侯华峰; 刘涛; 刘宏基; 周骞; 赵雷杰; 刘晓艳; 崔好选, 一种新型高强塑积异质冷轧中锰钢的力学性能, 材料研究学报, 2019, 33(12): 927-934. [24] Zhou Qian, Qian Lihe, Zhao Leijie, Zhu Qingchun, Meng Jiangying, Zhang Fucheng. Loading-rate dependence of fracture absorption energy of low-carbon carbide-free bainitic steel[J]. Journal of Alloys and Compounds, 2015, 650: 944-948. [SCI] [25] Zhou Qian, Qian Lihe *, Meng Jiangying, Zhao Leijie, Zhang Fucheng. Low-cycle fatigue behavior and microstructural evolution in a low-carbon carbide-free bainitic steel[J]. Materials and Design, 2015, 85: 487-496. [SCI] [26] Meng Jiangying, Feng Ying, Zhao Leijie, Qian Lihe*. Effects of austempering temperature on strength, ductility and toughness of low-C high-Al/Si carbide-free bainitic steel[J]. Journal of Materials Engineering and Performance, 2015, 24(8): 3068-3076. [SCI] |
工程大学官网