INTRODUCTION

This conference is hosted by Hebei University of Engineering (HUE), China, co-organized by Loughborough University (LU), UK and Hebei Society of Mechanical Engineering, undertaken by School of Mechanical and Equipment Engineering of HUE, School of Materials Science and Engineering, the Key Laboratory of Intelligent Industrial Equipment Technology of Hebei Province, the Modern Equipment Manufacturing Collaborative Innovation Center of Southern Hebei New District, Hebei Engineering Research Centre for Rare Earth Permanent Materials and Applications, Technology Innovation Center of Modified Plastics of Hebei Province, and Hebei Key Laboratory of Wear-resistant Metallic Materials with High Strength and Toughness. The main objectives are to provide a single and relaxing platform for scholars, researchers and engineers to exchange and assimilate new research ideas and information in the field of advanced materials and their applications in engineering equipment, and to promote collaboration opportunities between individuals and research institutions. At the same time, we hope that this conference will provide more opportunities for young scholars and encourage them to make a difference in academic research. The conference will invite well-known domestic and foreign experts to give online or offline reports. Both oral and poster presentations are welcome. The language of the conference is English. Please refer to the conference website for details http://icamea.hebeu.edu.cn.

l 复合材料与表面涂层

l 先进材料结构力学

l 增材制造技术

l 先进成形技术及数值模拟

l 先进材料测试技术与模型

l 材料损伤、断裂、疲劳及磨损

l 无人机及机器人

l 燃料电池技术与电动车辆

l 先进磁性材料与应用

l 高分子润滑与防护材料

CONFERENCE TOPICS

Topics of AMEA 2025 are included but not limited to:

l Composite Materials and Surface Coating

l Structural Mechanics of Advanced Materials

l Additive Manufacturing

l Advanced Forming Technology and Simulation

l Advanced Materials Testing and Modeling

l Material Damage, Fracture, Fatigue and Wear

l Unmanned Vehicles and Robots

l Fuel-cell Technologies and Electric Vehicles

l Advanced Magnetic Materials and Applications

l Polymer Lubricating and Protective Materials

l 2025年7月25日前，提交论文摘要。

l 2025年8月10日前，发布录用通知。。

l 2025年8月31日前，提交论文全文。

摘要与全文请发送至邮箱ICAMEA_hebeu@163.com, 联系电话0310- 3969627。

注意：提交英文论文摘要时，请在邮件主题中标明“投稿”字样，并在邮件正文里留下您的有效联系方式（包含姓名、电话、单位、地址、邮箱等）。

IMPORTANT DATES

l Jul 25, 2025, submit the abstract of the paper.

l Aug 10, 2025, notice of acceptance.

l Aug 31, 2025, submit the full text of the paper.

Please send the abstract and full text to ICAMEA_hebeu@163.com. Tel: 0310-3969627.

Note: Please mark "submission" in the subject of the email and leave your valid contact information (including name, telephone, affiliation, address, email, etc.) in the email when submitting an English abstract.

摘要为1-2张A4页面，全文不少于3张A4页面，包括图片、表格和参考文献，并以PDF格式和Word格式通过电子邮件提交。正文字体Times New Roman，大小12（见后面所附详细模板）。

ABSTRACT AND FULL PAPER REQUIREMENT

       One or two A4 pages for the abstract is required. Three or more A4 pages for the full paper are required, including figures, tables and references, and should be submitted as a PDF and Word format by email. The text should be in size 12 and use the Times New Roman font. Detailed templates are attached.

l 摘要集将在会前报到处提供

l 完整论文可根据作者意愿提交给《世界工程杂志》

Publication

l Abstract books will be available at the reception.

l Full papers can be submitted to the World Journal of Engineering according to the wishes of the authors.

       HOST, CO-HOST, ORGANIZER

       HOST:           Hebei University of Engineering, China

       CO-HOST:    Loughborough University, UK

                              Hebei Society of Mechanical Engineering

       ORGANIZER:  

School of Mechanical and Equipment Engineering, HUE

                School of Materials Science and Engineering, HUE

                Key Laboratory of Intelligent Industrial Equipment Technology of Hebei Province

                Modern Equipment Manufacturing Collaborative Innovation Center of Southern Hebei New District

                Hebei Engineering Research Centre for Rare Earth Permanent Magnetic Materials & Applications

                Technology Innovation Center of Modified Plastics of Hebei Province

                Hebei Key Laboratory of Wear-resistant Metallic Materials with High Strength and Toughness

主  席：李河宗（河北工程大学机械与装备工程学院院长）

            王社民（英国拉夫堡大学教授）

副主席：潘   越  (河北省冀南新区现代装备制造协同创新中心主任)

孙   扬（河北工程大学机械与装备工程学院副院长）

郑立允（河北省稀土永磁材料与应用工程研究中心主任）

邢振国（河北省高强韧耐磨金属材料重点实验室主任）

成    员：

        薛应芳、赫巍巍、李国广、王艳辉、赵雷杰、翟志波、杨胜奇、王彦明、任勇、潘晨

ORGANIZING COMMITTEE

Chairman：

Hezong Li (Dean of School of Mechanical and Equipment Engineering, Hebei University of Engineering)

Simon S. Wang (Professor of Loughborough University, UK)

Simon S. Wang, Loughborough University, UK

Emmanuel E. Gdoutos, Democritus University of Greece, Greece

Kim Meow Liew, City University of Hong Kong, China

Wei Sun, University of Nottingham, UK

Liguo Zhao, Nanjing University of Aeronautics and Astronautics, China

Baihua Li, Loughborough University, UK

Christopher M. Harvey, Loughborough University, UK

Gary W. Critchlow, Loughborough, UK

Zhengming Huang, Tongji University, China

Shuguang Li, Nottingham University, UK

Xianping Liu, University of Warwick, UK

Zhanwei Liu, Beijing Institute of Technology, China

Ken Mao, University of Warwick, UK

Huimin Xie, Tsinghua University, China

Yufeng Xing, Beihang University, China

Jiashi Yang, University of Nebraska-Lincoln, USA

Xiaogang Yang, University of Nottingham Ningbo China, China

Bin Wang, Capegemini Company, Germany

Pengfei Liu, Zhejiang University, China

Chao Zhang, Northwestern Polytechnical University, China

Jianxiang Wang, Peking University, China

Hezong Li, Hebei University of Engineering, China

Jingjun Zhang, Hebei University of Engineering, China

Liyun Zheng, Hebei University of Engineering, China

Zilin Li, Hebei University of Water Resources and Electric Engineering, China

Yanming Wang, Hebei University of Engineering, China

联系人：任勇

电话：0310-3969627

邮箱：ICAMEA_hebeu@163.com

地址：河北省邯郸经济技术开发区太极路19号, 056038

会议网址：http://icamea.hebeu.edu.cn

CONTACT US

Contact Person: Yong Ren

Phone: 0310-3969627

E-mail: ICAMEA_hebeu@163.com

Address: No.19 Taiji Road, Economic and Technological Development District, Handan, Hebei, China, 056038

Conference Website: http://icamea.hebeu.edu.cn

Title (Bold font: 14)

Author One1,*, Author Two2, Author Three3 (Initials Surname)

1 Full postal address & email (* means the corresponding author)

2 Full postal address

3 Full postal address

Keywords: (Maximum 5)

Abstract:

(The abstract should contain the following three parts in general)

1. Background and Aims; 2. Methodologies; 3. Main results

References:

Reference to a journal publication:

[1] B. Liu, Y.F. Xing, M. Ferreira, et al. Carbon isotope evidence for the stepwise oxidation of the Proterozoic environment [J]. Nature, 1992, 359: 605-609.

Reference to a book:

[2] W. Strunk Jr., E.B. White. The elements of style [M]. 3rd ed., Macmillan, New York, USA, 1979

Reference to a conference article:

[3] J.I. Takamura, S. Mizoguchi, in: Y. Yagi (Ed.), IISC. The Sixth International Iron and Steel Congress [C]. Iron and Steel Institute of Japan, Nagoya, Japan, 1990, pp. 591–597.

Reference to a dissertation:

[4] R. B. Calms. Infrared spectroscopic studies on solid oxygen [D]. Berkeley: Univ. of California, 1965.

Your Paper's Title Starts Here: Please Center
use Helvetica (Arial) 14

First Author^1,a, Second Author^2,b,*, others^3,c

¹Full address of first author, including country

²Full address of second author, including country

³List all distinct addresses in the same way

^aemail, ^bemail, ^cemail

*Corresponding author

Keywords: First, Second, Third, ……

For the rest of the paper, please use Times Roman (Times New Roman) 12

Abstract. This template explains and demonstrates how to prepare your camera-ready manuscript for publisher. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to Letter format (21.59 x 27.94 cm or 8.5x11 inches); with the margins: bottom 2.8 cm (1.1 in) and top 2.8 cm (1.1 in), right/left margins must be 2.54 cm (1 in). Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

Introduction (Heading 1)

All manuscripts must be in English, also the table and figure texts, otherwise we cannot publish your paper.

Please keep a second copy of your manuscript in your office. When receiving the paper, we assume that the corresponding authors grant us the copyright to use the paper for the book or journal in question. Should authors use tables or figures from other Publications, they must ask the corresponding publishers to grant them the right to publish this material in their paper.

Use italic for emphasizing a word or phrase. Do not use boldface typing or capital letters except for section headings (cf. remarks on section headings, below).

Organization of the Text

Section Headings (Heading 2)

The section headings are in boldface capital and lowercase letters. Second level headings are typed as part of the succeeding paragraph (like the subsection heading of this paragraph).

Page Numbers (Heading 3). Do not number your paper:

Tables. (refer with: Table 1, Table 2, ...) should be presented as part of the text, but in such a way as to avoid confusion with the text. A descriptive title should be placed above each table. Units in tables should be given in square brackets [meV]. If square brackets are not available, use curly {meV} or standard brackets (meV).

Special Signs. for example , α γ μ Ω () ≥ ± ● Γ {110} should always be written in with the fonts Times New Roman or Arial, especially also in the figures and tables.

Macros. Do not use any macros for the figures and tables. (We will not be able to convert such papers into our system)

Language. All text, figures and tables must be in English.

Figures. Figures (refer with: Fig. 1, Fig. 2, ...) also should be presented as part of the text, leaving enough space so that the capt­ion will not be confused with the text. The caption should be self-contained and placed below or beside the figure. Generally, only original drawings or photographic reproductions are acceptable. Only very good photocopies are acceptable. Utmost care must be taken to insert the figures in correct alignment with the text. Half-tone pictures should be in the form of glossy prints. If possible, please include your figures as graphic images in the electronic version. For best quality the pictures should have a resolution of 300 dpi(dots per inch).

Color figures are welcome for the online version of the journal. Generally, these figures will be reduced to black and white for the print version. The author should indicate on the checklist if he wishes to have them printed in full color and make the necessary payments in advance.

Equations. Equations (refer with: Eq. 1, Eq. 2, ...) should be indented 5 mm (0.2"). There should be one line of space above the equation and one line of space below it before the text continues. The equations have to be numbered sequentially, and the number put in parentheses at the right-hand edge of the text. Equations should be punctuated as if they were an ordinary part of the text. Punctuation appears after the equation but before the equation number, e.g.

c² = a² + b²   (Eq.1)

Literature References

References are cited in the text just by square brackets [1]. (If square brackets are not available, slashes may be used instead, e.g. /2/.) Two or more references at a time may be put in one set of brackets [3,4]. The references are to be numbered in the order in which they are cited in the text and are to be listed at the end of the contribution under a heading References, see our example below.

Summary

If you follow the “checklist” your paper will conform to the requirements of the publisher and facilitate a problem-free publication process.

Acknowledgement

This part can describe some information about found support if necessary.

References

Reference to a journal publication:

[1] B. Liu, Y.F. Xing, M. Ferreira, et al. Carbon isotope evidence for the stepwise oxidation of the Proterozoic environment [J]. Nature,1992, 359: 605-609.

Reference to a book:

[2] W. Strunk Jr., E.B. White. The elements of style [M]. 3rd ed., Macmillan, New York, USA, 1979.

Reference to a conference article:

[3] J.I. Takamura, S. Mizoguchi, in: Y. Yagi (Ed.), IISC. The Sixth International Iron and Steel Congress [C]. Iron and Steel Institute of Japan, Nagoya, Japan, 1990, pp. 591–597.

Reference to a dissertation:

[4] R. B. Calms. Infrared spectroscopic studies on solid oxygen [D]. Berkeley: Univ of California, 1965.